Marshall properties of LASBUTAG asphalt mixes with pertalite as a modifier

LASBUTAG is one of the surface layers in road construction which consists of a
mixture of Asbuton, coarse aggregate, fine aggregate and rejuvenating material, which is stirred,
spread out and cold compacted. The modifier used 60/70 penetration petroleum bitumen which
was cured for ± 3-5 days until dilute petroleum bitumen and lawele granular asbuton were cured
with pertalite for ± 24 hours to remove the bitumen content. Variations in the asphalt content
used are 1%, 1.5%, 2%, 2.5%, 3% and 3.5% with 3 x 6 test objects for standard marshall 18
pieces and 6 pieces for Marshall immersion so the total test objects made of 24 cylindrical pieces
with a volume of 1200 grams. The results showed that all Marshall characteristics obtained had
an effect on Marshall Stability, VMA and Marshall Quotient, but had less effect on (VIM), from
variations of 1%, 1.5%, 2%, 2.5%, 3% and 3.5% used for stability. The marshall, VMA, VIM
and marshall quotient tested all met the standards except for the variation of 3% and 3.5% which
did not meet the VIM values for the standards used. And from the variations that meet the
stability requirements, VMA, VIM and Marshall quotient are 1.75%